Description
This is an old floor fan, not sure on age. The wiring was really brittle and I replaced with a temporary cord to see if unit runs, it did, puts out a LOT of air. I removed from the stand (see picture with it still attached). Looks like a home built base and really heavy. NOTE: A couple things, I am listing as only shipping the fan itself as including the base would be very expensive and packaging a challenge. ALSO, THE WIRING IS NOT ADEQUATE THAT I USED BASED ON WHAT I REPLACED, JUST FYI. IT HAS A 30 AMP SCREW IN FUSE WHICH SEEMS TOO LARGE BUT I'M GUESSING THEY PUT IN WHAT THEY HAD, AGAIN, JUST FYI. Fan and Motor weigh over 25 lbs. Really is a fan from the past!!! Just trying to make sure you understand the electrical and what I will ship. Can certainly include the stand for a local pick up and of course no shipping costs.. Thanks for Looking